Fence Installation Cost: Labor per Foot, Replacement & Removal
Fence installation cost is materials plus labor, and labor is often 40–60% of the bill. This page breaks out labor per foot for every material, prices tearing out and replacing an old fence, and lets you estimate your own project by length and region.
Fence installation labor costs about $7.70/ft for chain link, $11.27/ft for pine, $11.85/ft for vinyl and $20.80/ft for wrought iron on top of materials. Removing an old fence adds $3–$7 per foot, so replacing 150 ft of wood privacy fence runs about $3,001–$6,791.
Fence installation cost calculator
Installed cost estimate$4,821$3,001–$6,791 · $32.14 per linear ft
Hiring a pro adds about $1,691 in labor.
| Fence installed (150 ft × $25.00/ft) | $2,250–$5,250 |
|---|---|
| Corner, end and gate posts (4 extra) | $80 |
| 1 single gate | $221–$411 |
| Old fence removal & haul-away | $450–$1,050 |
| Estimated total | $3,001–$6,791 |
| Item | Qty |
|---|---|
| Posts 4×4 × 9 ft (ground-contact rated) | 22 |
| Rails 2×4 × 8 ft (3 per section) | 57 |
| Pickets 1×6 × 6 ft (+10% waste) | 360 |
| Exterior screws or ring-shank nails2 per board per rail | 2,160 |
| Stain/sealer gallons (both sides, optional) | 11 |
| Concrete, 80 lb bags10 in × 36 in holes | 66 |
| Single gate with hardware | 1 |
- Professional installation: materials + labor
- Region: Midwest (labor ×1, materials ×1)
- Height 6 ft vs. 6 ft reference: price ×1
- Standard style and grade
- Posts every 8 ft — 22 posts, 10 in × 36 in holes
- Terrain: Flat
What is the labor cost to install a fence per foot?
The labor cost to install a fence per foot is the gap between the installed and DIY price: roughly $7.70 for chain link up to $20.80 for ornamental iron, before regional adjustments.
| Option | DIY / ft | Installed / ft | 150 ft installed | Labor / ft |
|---|---|---|---|---|
| Chain link (galvanized) | $7.23 | $9.47–$20.39 | $1,421–$3,059 | $7.70 |
| Wood — pressure-treated pine | $16.37 | $17.01–$38.27 | $2,551–$5,741 | $11.27 |
| Wood — cedar | $21.50 | $22.55–$44.15 | $3,382–$6,623 | $11.85 |
| Vinyl — privacy | $21.77 | $22.81–$44.42 | $3,422–$6,663 | $11.85 |
| Composite | $25.53 | $25.89–$51.19 | $3,883–$7,678 | $11.50 |
| Aluminum | $26.40 | $28.35–$50.30 | $4,252–$7,545 | $12.93 |
| Steel (ornamental) | $34.28 | $34.50–$67.26 | $5,175–$10,089 | $16.60 |
| Wrought iron / ornamental | $41.80 | $40.76–$84.44 | $6,114–$12,666 | $20.80 |
| Wood — split rail | $9.57 | $9.34–$22.15 | $1,401–$3,322 | $6.17 |
| Barbed wire | $4.01 | $4.07–$9.71 | $611–$1,457 | $2.89 |
How much does it cost to replace a fence?
The cost to replace a fence is the new fence plus tear-out and haul-away of the old one ($3–$7 per foot; chain link is at the low end, wood with concrete footings at the high end). Reusing sound posts can cut 15–25% off a wood replacement.
| Option | DIY / ft | Installed / ft | 150 ft installed |
|---|---|---|---|
| Wood privacy (pine) | $20.87 | $20.01–$45.27 | $3,001–$6,791 |
| Cedar privacy | $26.00 | $25.55–$51.15 | $3,832–$7,673 |
| Chain link | $11.73 | $12.47–$27.39 | $1,871–$4,109 |
| Vinyl privacy | $26.27 | $25.81–$51.42 | $3,872–$7,713 |
Fence removal cost
Fence removal costs about $3 to $7 per linear foot — $450–$1,050 for 150 ft — including pulling posts and disposal. Posts set in concrete, heavy masonry and steep or tight access cost more. Some installers discount removal when you hire them for the new fence.
Fence installation cost by region
| Region | Labor | Materials | 150 ft installed |
|---|---|---|---|
| NortheastCT, MA, ME, NH, NJ, NY, PA, RI, VT | ×1.25 | ×1.15 | $3,062–$6,889 |
| MidwestIA, IL, IN, KS, MI, MN, MO, ND, NE, OH, SD, WI | ×1.00 | ×1.00 | $2,551–$5,741 |
| SouthAL, AR, DC, DE, FL, GA, KY, LA, MD, MS, NC, OK, SC, TN, TX, VA, WV | ×0.95 | ×0.95 | $2,424–$5,454 |
| WestAK, AZ, CA, CO, HI, ID, MT, NM, NV, OR, UT, WA, WY | ×1.30 | ×1.20 | $3,189–$7,176 |
Labor rates drive most of the regional difference; the West and Northeast pay the most.
How to save on fence installation
- Get three written quotes with the same height, material, gates and removal.
- Remove the old fence yourself if posts are not in concrete.
- Install in fall or winter in mild climates, when contractors are less busy.
- Share the cost with a neighbor on a boundary fence.
- Buy the materials and pay for labor only — ask first; not every contractor allows it.
Frequently asked questions
How much does fence installation cost per foot?
Fence installation costs about $8.00–$18.00 per foot for chain link, $15.00–$35.00 for pine, $20.00–$40.00 for vinyl and $35.00–$75.00 for wrought iron, materials and labor included.
How much does it cost to replace a 150 ft fence?
Replacing a 150 ft fence costs about $3,001–$6,791 for 6-ft pine privacy and $1,871–$4,109 for 4-ft chain link, removal of the old fence included.
How long does fence installation take?
Fence installation takes 1–3 days for a typical 150–200 ft residential fence; concrete-set posts may need a day to cure before panels go on.
Is it cheaper to repair or replace a fence?
It is cheaper to repair a fence when fewer than about a quarter of the posts or boards are damaged; replacing a few posts runs about $100–$300 each. Widespread rot or leaning means replacement is the better value.
Sources and methodology
- Angi — fence removal cost
- Fixr — fence installation cost
- HomeAdvisor — fence installation cost
- US Bureau of Labor Statistics — construction laborers
Price ranges reviewed . How we calculate.