Fence Post Depth Calculator: How Deep Should Fence Posts Be?
This fence post depth calculator tells you how deep to dig each post hole from your fence height, fence type, soil, wind exposure and local frost line. It also sizes the hole, picks the post length to buy and counts the concrete.
Fence posts should be set one-third to one-half of the above-ground height deep, and never less than 24 in. A 4-ft open fence needs about 24 in, a 6-ft privacy fence 36 in (10-ft posts) and an 8-ft fence 48 in. In cold states, go 6 in below the frost line.
Fence post depth calculator
Recommended post depth36 in3 ft deep for a 6 ft fence · minimum 24 in
| Recommended depth | 36 in (3 ft) |
|---|---|
| Absolute minimum | 24 in |
| Hole diameter | 11 in (about 3× the post width) |
| Hole depth with gravel | 42 in (6 in gravel base) |
| Post length to buy | 10 ft (4×4 wood) |
| Concrete per post | 3 × 80 lb or 5 × 50 lb fast-setting |
- Rule used: solid/privacy fence: half the above-ground height.
- Call 811 before digging, and check your city’s fence code for required depths.
Fence post depth chart
| Fence height | Open fence | Solid / privacy | Post length (privacy) | Hole diameter |
|---|---|---|---|---|
| 3 ft | 24 in | 24 in | 6 ft | 11 in |
| 4 ft | 24 in | 24 in | 7 ft | 11 in |
| 5 ft | 24 in | 30 in | 8 ft | 11 in |
| 6 ft | 24 in | 36 in | 10 ft | 11 in |
| 7 ft | 28 in | 42 in | 12 ft | 11 in |
| 8 ft | 32 in | 48 in | 14 ft | 11 in |
Add 6 in for gate posts, sandy soil or high wind, and set every post at least 6 in below your local frost line so freeze-thaw cycles cannot lift it.
How deep should fence posts be?
Fence posts should be buried deep enough that one-third to one-half of the post’s visible height is underground, with 24 in as the practical minimum. Open fences (picket, chain link, split rail) catch little wind, so one-third works; solid privacy fences act like a sail and need closer to one-half. Corner, end and gate posts carry extra load — give them 6 in more or a wider footing.
Do fence posts need to go below the frost line?
Fence posts set in concrete do need to go below the frost line in cold climates, otherwise frozen soil grips the footing and pushes it up a little every winter (frost heave). Dig 6 in deeper than the frost depth your city publishes, bell the bottom of the hole slightly wider than the top, and put 4–6 in of gravel underneath for drainage.
How wide should a fence post hole be?
A fence post hole should be about three times as wide as the post: 10–11 in for a 4×4, 16 in for a 6×6, 12 in for a 5×5 vinyl post and 8 in for 1-7/8 or 2-3/8 in steel. The fence post concrete calculator turns that hole into bags of concrete.
Frequently asked questions
How deep should a 6 ft fence post be?
A 6 ft fence post should be about 36 in deep for a privacy fence (24 in minimum for an open fence), which means buying 10-ft posts and digging 42-in holes to leave room for gravel.
How deep should a 4 ft fence post be?
A 4 ft fence post should be 24 in deep — one-third of 48 in is 16 in, but 24 in is the practical minimum for any fence post.
How deep should an 8 ft fence post be?
An 8 ft fence post should be about 48 in deep, usually a 6×6 or a steel post, and it often needs a permit; 12-ft posts are typical.
Is 2 feet deep enough for a fence post?
Two feet is deep enough for a fence post on a 4-ft open fence in mild climates. For a 6-ft privacy fence, high wind or a frost line deeper than 18 in, go deeper.
How deep do gate posts need to be?
Gate posts need to be about 6 in deeper than the line posts and set in a wider hole, because the swinging gate adds leverage every time it opens.
Sources and methodology
Price ranges reviewed . How we calculate.